Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble
Machinery Function Features:
Rail-Type Chain Arm Saw The rail-type chain arm saw is a fundamental and widely used stone-cutting machine for marble and limestone quarries. It runs on interchangeable rails laid directly on the ore body, enabling continuous straight cuts. Key Features • Dual Cutting Modes: Supports both vertical and horizontal cutting for flexible block extraction. • Dry Cutting Operation: No water supply required, simplifying site logistics. • High Efficiency: Designed for hard stone, delivering deep, precise
Dry cuts, no water supply required. The products are referred to Italy mainstream manufacturers’ design, reasonable layout and structure, convenient operation. The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer. The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant. The hydraulic components are also from Italy. The main oil pumps and hydraulic motors are made in Germany. The electrical components are mainly from
Type: Stone Quarry Machines › Stone Chain Saw Machines › Squaring Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
The SV-C/70 mod. chain saw has been designed and built to execute vertical and frontal cuts on large banks or large blocks in ornamental stone quarries, and does not require water cooling. The machine is mounted on a fifth wheel track system enabling it to negotiate even the most difficult terrain, and the endothermic diesel motor guarantees autonomy and independence. It is capable of achieving cutting depths of up to 6.2 m (length) and 7.0 m (height). Installed power: 62.5 Kw Weight: 24,000 Kg
Terna FANTINI Block Sawing Machine The Terni Fantini is a machine made from a rubber tired JCB vehicle and a group of Fantini cutters. The extreme versatility of its’ rubberised four-wheel drive allows you to reach cutting areas quickly, whether they are: blocks spread over the quarry, banks on the ground or even cuts executed directly at the front of the bank. As the machine travels to the block and not the other way round, the Fantini back allows you to save time and money. The operator works
70BU-C Block Sawing Machine Chain Saw Model 70BU-C is a self-propelled crawler for vertical cutting, and can be fitted with arms that can cut up to 4.0 metres deep. The machine is fitted with a unique self-propelled track with hydraulic stabiliser feet. It can autonomously move into different areas of a quarry to make cuts into floors or square off blocks, without the need for water. The machine is fitted with a diesel engine which allows completely autonomous operation, eliminating the need for
Type: Stone Quarry Machines › Stone Chain Saw Machines › Backhoe Squaring Chain Saw
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
QST3000D Chain Saw Machine on Backhoe The QST3000D chain saw machine mounted on a backhoe represents the latest frontier for squaring blocks of marble and natural stone. Its technology is powered by the backhoe’s powerful motor , and the hydraulic circuit for moving the chain saw was developed in collaboration with Caterpillar technicians and our own technical team. Key Advantages Operates day and night in all weather conditions , as the operator can control the cabin temperature. Can work witho
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble
Machinery Function Features:
Rail-Type Chain Arm Saw The rail-type chain arm saw is a fundamental and widely used stone-cutting machine for marble and limestone quarries. It runs on interchangeable rails laid directly on the ore body, enabling continuous straight cuts. Key Features • Dual Cutting Modes: Supports both vertical and horizontal cutting for flexible block extraction. • Dry Cutting Operation: No water supply required, simplifying site logistics. • High Efficiency: Designed for hard stone, delivering deep, precise
Type: Stone Quarry Machines › Stone Chain Saw Machines › Backhoe Squaring Chain Saw
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
QST3000D Chain Saw Machine on Backhoe The QST3000D chain saw machine mounted on a backhoe represents the latest frontier for squaring blocks of marble and natural stone. Its technology is powered by the backhoe’s powerful motor , and the hydraulic circuit for moving the chain saw was developed in collaboration with Caterpillar technicians and our own technical team. Key Advantages Operates day and night in all weather conditions , as the operator can control the cabin temperature. Can work witho
Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Ask a Question
Could not find the answer you need? Ask about Block Squaring Chain Saw.
Can a quarry chain saw machine cut granite?View answer⌄
Asked by Visitor
Quarry chain saw machines are designed for use in medium hardness stone quarries but with the suitable cutting segments they also can be used in granite quarries.
China
Italy
9YR
