Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble
Machinery Function Features:
Rail-Type Chain Arm Saw The rail-type chain arm saw is a fundamental and widely used stone-cutting machine for marble and limestone quarries. It runs on interchangeable rails laid directly on the ore body, enabling continuous straight cuts. Key Features • Dual Cutting Modes: Supports both vertical and horizontal cutting for flexible block extraction. • Dry Cutting Operation: No water supply required, simplifying site logistics. • High Efficiency: Designed for hard stone, delivering deep, precise
Model：FM- CS3200 Power： 53Kw Input Power and cable： 380V 50HZ， 3×35 mm²+1×10 mm² Capacity of the hydraulic tank： 200L Lubricating oil capacity： 25kg The maximum vertical cutting depth： 3.2m The maximum horizontal cutting depth： 3.2m Kerf width： 40 mm Chain rotation Angle： 360° Cutting chain speed： 0～1.2m/s Quick positioning speed： 30m/h Cutting speed： 0～7 m/h Water supply and Water pressure： 30L/min,3bar(Cutting normal Marble doesn't need water.）
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Basalt, Sandstone
Machinery Function Features:
1.Marble chain saws enable dry cutting without water cooling, reducing noise and dust pollution. 2.The marble chain arm saw can be suitable for marble ore bodies of different materials and can be used in one machine. 3.Intelligent settings minimise preparatory work for high productivity, simplifying operation and effectively reducing labour intensity. 4.The orbital chain arm saw is direcly placed on the surface of the mining body. The machine is equipped with 3 orbits as standard. The tracks are
Dry cuts, no water supply required. The products are referred to Italy mainstream manufacturers’design, reasonable layout and structure, convenient operation. The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer. The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant. The hydraulic components are also from Italy. The main oil pumps and hydraulic motors are made in Germany. The electrical components are mainly from S
Our CSM series chain saw machines are suitable for dry cutting marble and soft stone. They can be used for multiple purposes and can cut the stone horizontally and vertically. Features: High rigidity, ensuring long-term stability and efficient operation; Friendly man-machine interface, easy to operate and maintain; PLC integrated control, realizing no dead angle cutting; The unique hydraulic control system can automatically adjust the cutting parameters according to the hardness of the stone to
The chain saw for rails machine is the most basic type, whose rails are placed on the surface of mining or body, and the rails are used alternately. Each machine can be designed to have two working modes of vertical and horizontal cutting, which is suitable for wide range of marble mines with high mining efficiency.
Chain saw for crawler is the enhanced one of orbital-type chain saw, the biggest characteristic of the machine is equipped with a pedrail walking itself, moving conveniently and flexibly.The machine host and pedrail move alternately in working, which don’t need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. The machine can move on the uneven ground, allowing the machine to overcome inclined surfaces up to 25%(14°) The all machine is driven by a radio
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
SMT-CS3400 chain saw for wheel loader consists of chain arm cutting system and wheel loader , mainly used for cuting large blocks and cutting strip ore belt in mine , its features are : 1.This machine is powered by the diesel engine of the wheel loader , which can work independently without external power supply. 2.Mining operators work in the sealed cab in a friendly and safe working environment . 3.The machine can move fast and operate conveniently with high eficiency .
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
The chain saw for rails machine is the most basic type, whose rails are placed on the surface of mining or body, and the rails are used alternately. Each machine can be designed to have two working modes of vertical and horizontal cutting, which is suitable for wide range of marble mines with high mining efficiency.
The chain saw for rails machine is the most basic type, whose rails are placed on the surface of mining or body, and the rails are used alternately. Each machine can be designed to have two working modes of vertical and horizontal cutting, which is suitable for wide range of marble mines with high mining efficiency.
Chain saw for crawler is the enhanced one of orbital-type chain saw, the biggest characteristic of the machine is equipped with a pedrail walking itself, moving conveniently and flexibly.The machine host and pedrail move alternately in working, which don’t need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. The machine can move on the uneven ground, allowing the machine to overcome inclined surfaces up to 25%(14°) The all machine is driven by a radio
SMT-CS3400 chain saw for wheel loader consists of chain arm cutting system and wheel loader , mainly used for cuting large blocks and cutting strip ore belt in mine , its features are : 1.This machine is powered by the diesel engine of the wheel loader , which can work independently without external power supply. 2.Mining operators work in the sealed cab in a friendly and safe working environment . 3.The machine can move fast and operate conveniently with high efficiency .
Type: Stone Quarry Machines › Stone Chain Saw Machines › Squaring Chain Saw Machines
Usage: Granite, Marble
Machinery Function Features:
Crawler-type chain saw is the enhanced one of orbital-type chain saw,the biggest characteristic of the machine is equipped with a pedrail walking itself,moving conveniently and flexibly. The machine host and pedrail move alternately in working , which don't need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. Each machine can be designed to have two kinds of working model--- vertical and horizontal cutting.
GD-CS2500, GD-CS3200, GD-CS4000,GD-CS6000, GD-CS7500 marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can transla
GD-CS3200-XD marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requir
GD-CS3200-YT marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requir
GD-CS3200-LY marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requir
LD-CS2500-P marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining require
Crawler-type chain saw is the enhanced one of orbital-type chain saw, the biggest characteristic of the machine is equipped with a pedrail walking itself, moving conveniently and flexibly. The machine host and pedrail move alternately in working , which don't need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. Each machine can be designed to have two kinds of working model--- vertical and horizontal cutting.
Mobile Single Wire Saw with Crawler harmonizes the advantages of a stationary machine with a mobile quarry machine. It is composed of a single wire structure installed on a track chassis and is equipped with a diesel engine, which can be easily configured for transport from quarry to quarry on trailer. Equipped with 4 hydraulic stabilizers, the cutting arch is rotated and brought to the desired height, thus aligning the wire to the face of the block to be cut. The arch structure slides verticall
Marble chain saw is for marble quarrying. The chain arm may rotate in 360 degree for vertical andhorizontal cutting which can translate freely according to the mining requirement. The cuttingspeed can be adjusted according to the hardness ofstone when the moving speed of moving platform between 0-10.3m/h.
Dry cuts, no water supply required. The products are referred to Italy mainstream manufacturers’ design, reasonable layout and structure, convenient operation. The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer. The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant. The hydraulic components are also from Italy. The main oil pumps and hydraulic motors are made in Germany. The electrical components are mainly from
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Usage: Granite, Marble
Machinery Function Features:
Cavern-type chain saw is special for marble hole mining, crawler walking conveniently and flexibly, its orbit can rotate 270 degrees, which has 4 kinds of working model---horizontal cutting(cutting the top of ceiling and ground),vertical cutting(cutting left side of the facade and the right side of the facade),suitable for the quarries with high steep slope and can't excavate mountain skin layer and do overburden stripping.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Usage: Granite, Marble, Quartzite
Machinery Function Features:
Orbital-type chain saw is the most basic type,the rails used interchangeably in working, suitable for open-pit mine,each machine can be designed to have two working mode--- vertical and horizontal cutting; Orbital-type chain saw can be designed into the single rail longitudinal mobile model.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble
Machinery Function Features:
Rail-Type Chain Arm Saw The rail-type chain arm saw is a fundamental and widely used stone-cutting machine for marble and limestone quarries. It runs on interchangeable rails laid directly on the ore body, enabling continuous straight cuts. Key Features • Dual Cutting Modes: Supports both vertical and horizontal cutting for flexible block extraction. • Dry Cutting Operation: No water supply required, simplifying site logistics. • High Efficiency: Designed for hard stone, delivering deep, precise
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Basalt, Sandstone
Machinery Function Features:
1.Marble chain saws enable dry cutting without water cooling, reducing noise and dust pollution. 2.The marble chain arm saw can be suitable for marble ore bodies of different materials and can be used in one machine. 3.Intelligent settings minimise preparatory work for high productivity, simplifying operation and effectively reducing labour intensity. 4.The orbital chain arm saw is direcly placed on the surface of the mining body. The machine is equipped with 3 orbits as standard. The tracks are
Marble chain saw is for marble quarrying. The chain arm may rotate in 360 degree for vertical andhorizontal cutting which can translate freely according to the mining requirement. The cuttingspeed can be adjusted according to the hardness ofstone when the moving speed of moving platform between 0-10.3m/h.
Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Ask a Question
Could not find the answer you need? Ask about Stone Chain Saw Machines in China.
Can a quarry chain saw machine cut granite?View answer⌄
Asked by Visitor
Quarry chain saw machines are designed for use in medium hardness stone quarries but with the suitable cutting segments they also can be used in granite quarries.
China
9YR
