Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite
Machinery Function Features:
UNDERGROUND MACHINE Mod. SV-C 50 Special chain saw machine for back cut of blocks in the underground quarry. Total power 30 KW Hidrostatic transmission with variable speed pump Weight Kg. 8.000 Useful cut up to 1.60 mt (on the right side as well as on the left side) Hydraulic oil tank capacity Lt. 150 Chain rotation speed from 0,1 to 0,7 mt./sec. Arm cutting speed rate up to 15 cm/min. Grease capacity up to 500gr/h Noise level rate: 85 decibel Max speed on tracks 1,5 km/h Chain saw dimensions: L
Type: Stone Quarry Machines › Stone Chain Saw Machines › Backhoe Squaring Chain Saw
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
MOBILE CHAIN SAW FOR SQUARING BLOCKS Chain saw on tractor JCB The Fantini cutting system has been produced for squaring the blocks on the face wall as well as in the working areas of the quarry. The cutting unit is transported on a wheeled tractor fast moving and positioning in front of the blocks to be squared. The whole operation is fast and does not need any auxiliary personnel nor water. Power: 68,6 Kw - Weight of tractor t: about 7.000 Kg - Weight of cutting unit: 2.000 Kg - Arm rotation: 9
The dust Aspirator completely removes the dust in the horizontal cut position as well as in the vertical one. The dust is unload at one side of the sliding rail by a worm screw system. Before entering in the filtering chamber the dust passes through a pre-chamber which allows to remove the big parts. - Tender version The dust aspirator is placed on the rail of the machine and translates with the machine. Supported models: -70 sup-H -70 rap -50.81 - Static version The dust aspirator is fixed in t
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Granite, Marble, Quartzite
Machinery Function Features:
UNDERGROUND MACHINE Mod. Gu.50-R-SC/T This chain saw can make vertical and horizontal cut against the underground face wall. It is a self propelled machine on tracks and completely autonomous in movements, besides it is equipped with a rotation fifth wheel. Only one operator is needed to operate the chain saw. This model of machine can make a cut until 2,0 m of depth in hard stones.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Squaring Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone
Machinery Function Features:
MOBILE CHAIN SAW FOR SQUARING BLOCKS Mod. 70 BUC It is a self propelled chain saw machine on tracked trolley for only vertical cut up to 4,0 m. of depth. The chain saw machine is equipped with one self translating rail and hydraulic pistons. It can self move in different areas of the quarry to cut and square the blocks with no need of water. All the movements of the machine are operated by a hydraulic system with main pump connected to an endotermic diesel motor. The endotermic diesel motor star
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite
Machinery Function Features:
If requested it is possible to install on Fantini chain saw machine a steel frame lifting module for better transport and positioning the chain saw machine in the quarry. The steel frame lifting module also protects the chain saw. Supported models: -70 sup-H current model -70 rap -50.90 current model -50.81 -20.90 current model
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
The Fantini 50.90 chain saw machine is designed for cutting medium soft stone, and cutting and squaring in quarries with sloped banks. It can be supplied with an arm with an effective cutting depth of up to 2.0 m. The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (P) , or single rail (BU), version; in the latter configuration, the machine can be repositioned by moving it along a single rail, without the need for li
Chain saw on which all drives are electric and controlled by Inverters. The higher energy efficiency with respect to hydraulic systems and the specific tool arrangement offer significantly better cutting speeds and tool life. A modern heavy-duty chain saw for sedimentary stone quarries,where the machine can perform cuts both vertical and horizontal. The machine is driven entirely by electric motors to reduce energy demand (due to the higher efficiency with respect to hydrostatic transmissions) a
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Electrical Motor Total Power:66KW Chain Rotation Speed: 0-900 mm/s Useful Cutting Depth:7000 mm (@70°) Cutting Speed: 0,5-4 (m/hr) (changes according to stone ) Arm Rotation: 360° Oil Tank Capacity: 320lt Grease Tank: 25lt + 180lt big oil tank Width of Cut: 38mm Total Weight:11000 kg Rail Weight: 1700 kg Width: 2300mm Length:10500mm Height:2220mm
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
The Benetti's chain saw model CSM 962 is an extremely robust design machine, which can perform primary vertical and horizontal cuts in limestone, marble, and travertine, even in dry conditions. All movements of the machine are controlled by means of reversible hydraulic transmissions systems, which allow a continuous speed adjustment.
Electric diamond belt sawing machine, designed to make tunnel cuts, vertical and horizontal. The JET BELT 940 is composed of two columns with two telescopic extensions for the machine fixing, connected with an horizontal beam of 462 cm that bears the electric cutting unit. This is composed of the main motor and the cutting arm with the diamond belt installed. The column bases are motorized for an easy positioning of the whole structure. The cutting tool consists of aspecial plastic belt with sin
Diamond belt sawing machine for vertical and horizontal cuts. The cutting tool consists of a special plastic belt with sintered diamond segments. Only water is used during the cutting phase, both for lubrication and cooling. The system can really be considered “ecological”, because no grease or oil are used during the working phase, so that to prevent dust production and grease pollution. The SUPER JET BELT 950 is electric driven, with electronic control of speed and advance; it can cut up to 40
CHAINTRONIC CH60 Chain saw on which all drives are electric and controlled by Inverters. The higher energy efficiency with respect to hydraulic systems and the specific tool arrangement offer significantly better cutting speeds and tool life.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone
Machinery Function Features:
The STANDISH DOUBLE BAR HORIZONTAL SAW allows the owner to make multiple cuts quickly and easily in one set-up. This unique saw utilizes 1 1/2” wide diamond belts (2) and 6’-3” cutting bars (2) to make horizontal cuts in the face of a vertical wall. The machine will make a bottom cut and a mid-wall cut at the same time with a top cut being made during a reverse pass along the wall. Features: • Double Bar with diamond cutting belt • Cutting belt drive—75 H.P. • Center to Center distance of cuttin
Dry cuts, no water supply required. The products are referred to Italy mainstream manufacturers’ design, reasonable layout and structure, convenient operation. The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer. The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant. The hydraulic components are also from Italy. The main oil pumps and hydraulic motors are made in Germany. The electrical components are mainly from
Diamond belt sawing machine for vertical and horizontal cuts. The cutting tool consists of a special plastic belt with sintered diamond segments. Only water is used during the cutting phase, both for lubrication and cooling. The system can really be considered “ecological”, because no grease or oil are used during the working phase, so that to prevent dust production and grease pollution. The SUPER JET BELT 950 is electric driven, with electronic control of speed and advance; it can cut up to 40
Type: Stone Quarry Machines › Stone Chain Saw Machines › Squaring Chain Saw Machines
Usage: Granite, Marble
Machinery Function Features:
Crawler-type chain saw is the enhanced one of orbital-type chain saw,the biggest characteristic of the machine is equipped with a pedrail walking itself,moving conveniently and flexibly. The machine host and pedrail move alternately in working , which don't need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. Each machine can be designed to have two kinds of working model--- vertical and horizontal cutting.
Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Ask a Question
Could not find the answer you need? Ask about Stone Chain Saw Machines.
Can a quarry chain saw machine cut granite?View answer⌄
Asked by Visitor
Quarry chain saw machines are designed for use in medium hardness stone quarries but with the suitable cutting segments they also can be used in granite quarries.
Italy
China
Turkey
Greece
United States
Russian Federation
4YR
